ETR4-11-W
Eaton Moeller® series ETR4 Timing relay
COSTURILE LOCALE DE TRANSPORT SUNT DE 30 RON FARA TVA
General specifications
| Product Name |
Eaton Moeller® series ETR4 Timing relay
|
| Catalog Number |
031883
|
| EAN |
4015080318835
|
| Product Length/Depth |
103 mm
|
| Product Height |
83 mm
|
| Product Width |
23 mm
|
| Product Weight |
0.107 kg
|
| Certifications |
VDE 0435
IEC/EN 61000-4-2 IEC/EN 61000-4-3 Standard IEC/EN 61812 |
| Model Code |
ETR4-11-W
|
Features & Functions
| Electric connection type |
Screw connection
|
| Functions |
On-delayed
Delay-on energization Fixed timing function |
General information
| Degree of protection |
Terminals: IP20
IP20 |
| Lifespan, mechanical |
30,000,000 Operations (AC operated)
30,000,000 Operations (DC operated) |
| Mounting position |
As required
|
| Number of contacts (change-over contacts) |
1
|
| Overvoltage category |
III
|
| Pollution degree |
2
|
| Product category |
ETR4 timing relays
|
| Rated impulse withstand voltage (Uimp) |
6000 V AC
|
| Shock resistance |
4 g, Make contact, Mechanical, according to IEC/EN 60068-2-27, Half-sinusoidal shock 20 ms
|
| Suitable for |
DIN rail (top hat rail) mounting
|
| Terminal capacity |
1 x (20 - 14) AWG, solid or stranded
1 x (0.5 - 2.5) mm², solid 1 x (0.5 - 2.5) mm², flexible with ferrule 2 x (0.5 - 1.5) mm², solid 2 x (0.5 - 1.5) mm², flexible with ferrule |
| Time range - min |
0.05 s
|
| Time range - max |
360000 s
|
| Type |
Timer relay
|
| Voltage type |
AC
|
Climatic environmental conditions
| Ambient operating temperature - min |
-25 °C
|
| Ambient operating temperature - max |
60 °C
|
| Ambient operating temperature (enclosed) - min |
-25 °C
|
| Ambient operating temperature (enclosed) - max |
45 °C
|
| Ambient storage temperature - min |
-45 °C
|
| Ambient storage temperature - max |
85 °C
|
| Climatic proofing |
Damp heat, constant, to IEC 60068-2-78
Damp heat, cyclic, to IEC 60068-2-30 |
Electro magnetic compatibility
| Air discharge |
8 kV
|
| Burst impulse |
According to IEC/EN 61000-4-4
2 kV, Supply cable 1 kV, Signal cable |
| Contact discharge |
6 kV
|
| Electromagnetic fields |
1 V/m at 2.0 - 2.7 GHz (according to IEC EN 61000-4-3)
10 V/m at 80 - 1000 MHz (according to IEC EN 61000-4-3) 3 V/m at 1.4 - 2 GHz (according to IEC EN 61000-4-3) |
| Immunity to line-conducted interference |
10 V (according to IEC/EN 61000-4-6)
|
| Radio interference class |
Class B (EN 55011, radiated)
Class B (EN 55011, conducted) |
| Surge rating |
According to IEC/EN 61000-4-5, power pulses (Surge), EMC
4 kV, asymmetrical, power pulses (Surge), EMC 2 kV, symmetrical, power pulses (Surge), EMC |
Electrical rating
| Conventional thermal current Ith of auxiliary contacts (1-pole, open) |
6 A
|
| Mains voltage tolerance |
400 V AC (at 50/60 Hz)
|
| Nominal current |
3 A
|
| Rated breaking capacity |
1.1 x Iₑ (DC-11 L/R - 40 ms)
3 A at AC-15 (cos ϕ = 0.3 220 V) 3 A at AC-14 (cos ϕ = 0.3 440 V) |
| Rated insulation voltage (Ui) |
600 V
|
| Rated making capacity |
48 A (AC-14 cos ϕ = 0.3 400 V)
1.1 x Iₑ (DC-11 L/R - 40 ms) 50 A (AC-15 cos ϕ = 0.3 220 V) |
| Rated operational current (Ie) |
1.5 A at DC-11, 24 V
3 A at AC-14, 380 V 400 V 415 V 3 A at AC-15, 380 V 400 V 415 V 3 A at AC-15, 220 V 230 V 240 V 3 A at AC-14, 440 V 1.2 A at DC-11, L/R max. 50 ms |
| Rated operational voltage (Ue) at AC - max |
440 V
|
| Safe isolation |
250 V AC, Between coil and auxiliary contacts, According to EN 61140
250 V AC, Between auxiliary contacts, According to EN 61140 |
| Short-circuit protection rating |
Max. 6 A gG/gL, fuse, Without welding, Contacts
Max. 6 A gG/gL, Fuse, Short-circuit rating without welding, Contacts |
Magnet system
| Command time |
50 ms, AC
|
| Contact changeover time |
4 ms
|
| Duty factor |
100 %
|
| Operating frequency |
4000 Operations/h
|
| Pick-up voltage |
0.85 - 1.1 V AC x Uc
|
| Power consumption |
0.5 VA at AC (Sealing power)
0.5 VA at AC (Pick-up power) |
| Rated control supply voltage (Us) at AC, 50 Hz - min |
400 V
|
| Rated control supply voltage (Us) at AC, 50 Hz - max |
400 V
|
| Rated control supply voltage (Us) at AC, 60 Hz - min |
400 V
|
| Rated control supply voltage (Us) at AC, 60 Hz - max |
400 V
|
| Rated control supply voltage (Us) at DC - min |
0 V
|
| Rated control supply voltage (Us) at DC - max |
0 V
|
| Recovery time |
70 ms (after 100 % time delay)
|
| Repetition accuracy |
≤ 0.5 % (deviation)
|
Design verification
| Equipment heat dissipation, current-dependent Pvid |
0 W
|
| Heat dissipation capacity Pdiss |
0 W
|
| Heat dissipation per pole, current-dependent Pvid |
1.4 W
|
| Rated operational current for specified heat dissipation (In) |
6 A
|
| Static heat dissipation, non-current-dependent Pvs |
0.5 W
|
| 10.2.2 Corrosion resistance |
Meets the product standard's requirements.
|
| 10.2.3.1 Verification of thermal stability of enclosures |
Meets the product standard's requirements.
|
| 10.2.3.2 Verification of resistance of insulating materials to normal heat |
Meets the product standard's requirements.
|
| 10.2.3.3 Resist. of insul. mat. to abnormal heat/fire by internal elect. effects |
Meets the product standard's requirements.
|
| 10.2.4 Resistance to ultra-violet (UV) radiation |
Meets the product standard's requirements.
|
| 10.2.5 Lifting |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.6 Mechanical impact |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.2.7 Inscriptions |
Meets the product standard's requirements.
|
| 10.3 Degree of protection of assemblies |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.4 Clearances and creepage distances |
Meets the product standard's requirements.
|
| 10.5 Protection against electric shock |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.6 Incorporation of switching devices and components |
Does not apply, since the entire switchgear needs to be evaluated.
|
| 10.7 Internal electrical circuits and connections |
Is the panel builder's responsibility.
|
| 10.8 Connections for external conductors |
Is the panel builder's responsibility.
|
| 10.9.2 Power-frequency electric strength |
Is the panel builder's responsibility.
|
| 10.9.3 Impulse withstand voltage |
Is the panel builder's responsibility.
|
| 10.9.4 Testing of enclosures made of insulating material |
Is the panel builder's responsibility.
|
| 10.10 Temperature rise |
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
|
| 10.11 Short-circuit rating |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.12 Electromagnetic compatibility |
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
|
| 10.13 Mechanical function |
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.
|
Politica de retur
Transport
Putem livra practic prin curier la orice adresa din Romania. Rețineți că există restricții pentru unele produse, iar unele produse nu pot fi expediate către destinații internaționale.
