Tuch Panel XV-102-A3-57TVRB-1E4 display EASY E4
zoom_out_map
chevron_left chevron_right
-15%

Tuch Panel XV-102-A3-57TVRB-1E4 display EASY E4

XV-102-A3-57TVRB-1E4

2.041,21 lei Cu TVA

1.715,30 lei Fara TVA

2.401,42 lei -15%

Livrare din STOC
check DISPONIBIL

COSTURILE LOCALE DE TRANSPORT SUNT DE 25 RON FARA TVA

Product range
Visualisation solutions XV
Product range
easyE4
XV-102
Subrange

Touch HMI easy
Function
Touch display for easyE4
Function
as a visualization for the easyE4 control relay
Description
Touch display for easyE4, 24 VDC, 5.7 inches, TFT color, 640x480 px, Ethernet
Communication with the easyE4 via Modbus TCP
Common features of the model series
Ethernet interface
USB device
Slot for SD card
Display - Type
Color display, TFT
Touch-technology
Resistive-Touch
Number of colours
64 k Colours
Resolution
640 x 480
VGA Pixel
Screen diagonal
5.7 Inch
Model
Plastic enclosure and glass panel in plastic frame
Operating system
Windows CE 5.0 (licence incl.)
PLC-licence
no PLC function possible
License certificates for onboard interfaces
not expandable
built-in interfaces
1 x Ethernet 100base-TX/10base-T
1 x USB device
1 x RS232
Front type
Standard front with standard membrane (fully enclosed)
Utilization
Flush mounting
Slots
for SD card: 1
Memory card automation
Optionally with SD card -> article no. 139807
Pluggable communication cards (optional)
no
Touch sensor
Glass with film
Heat dissipation
9.5 W
For use with
easyE4
For use with
EASY-E4-...-12...

TECHNICAL DATA

Display
Display - Type
Color display, TFT
Screen diagonal
5.7 Inch
Resolution
640 x 480
VGA Pixel
Visible screen area
115 x 86 mm
Number of colours
64 k Colours
Contrast ratio (Normally)
Normally 300:1
Brightness
Normally 250 cd/m2
Back-lighting
LED
dimmable via software
Service life of back-lighting
Normally 40000 h
Resistive touch protective screen
Touch sensor (glass with foil)
Operation
Technology
Resistive-Touch
4 wire
Touch sensor
Glass with film
System
Processor
RISC CPU, 32 Bit, 400 MHz
Internal memory
DRAM (OS, Program and data memory): 64 MByte
NAND-Flash (can be used for data backup): approx. 128 MByte available
NVRAM (retained data): approx. 32 KByte available
External memory
SD Memory Card Slot: SDA Specification 1.00
Cooling
Fanless CPU and system cooling, natural convection-based passive cooling
Back-up of real-time clockBattery (service life)
non-replaceable, CR2032 soldered in
Back-up of real-time clockBackup (time at zero voltage)
Normally 10 years
Engineering
Visualisation software
GALILEO
PLC-licence
no PLC function possible
Operating system
Windows CE 5.0 (licence incl.)
Interfaces, communication
built-in interfaces
1 x Ethernet 100base-TX/10base-T
1 x USB device
1 x RS232
USB Host
USB 2.0 (1.5 - 12 Mbit/s), not galvanically isolated
RS-232
RS-232, not galvanically isolated (SUB-D plug 9 pole, UNC)
Slots
for SD card: 1
Ethernet
100Base-TX/10Base-T
Power supply
Nominal voltage
24 V DC SELV (safety extra low voltage)
permissible voltage
Effective: 19.2-30.0 V DC (rated operating voltage -20%/+25%)
Absolute with ripple: 18,0-31,2 V DC
Battery powered: 18,0-31,2 V DC (rated operating voltage -25%/+30%)
35 V DC for a duration of < 100 ms
Voltage dips
≤ 10 ms from rated voltage (24 V DC)
5 ms from undervoltage (19.2 V DC) ms
Power consumption [Pmax.]
10 W
Note on power consumption
Basic device
USB Slave to USB Host: 2.5
Total: 9.5
Heat dissipation
9.5 W
Note on heat dissipation
Heat dissipation with power consumption for 24 V
7 W for basic device + 2.5 W for USB module
Protection against polarity reversal
yes
Type of fuse
Yes (fuse not accessible)
Potential isolation
no potential isolation
General
Housing material
Plastic, gray
Front type
Standard front with standard membrane (fully enclosed)
Dimensions (W x H x D)
170 x 130 x 39 mm
flush mounted
Clearance: W x H x D ≥ 30 mm (1.18")
Inclination from vertical: ±45° (if using natural convection)
Material thickness at the installation cutout: min. 2 mm (0.08"), max. 5 mm (0.2")
Weight
0.6 kg
Degree of protection (IEC/EN 60529, EN50178, VBG 4)
IP65 (at front), IP20 (at rear)
ApprovalsApprovals
cUL (UL508)
EAC
ApprovalsExplosion protection (according to ATEX 94/9/EC)
II 3D Ex II T70°C IP5x: Zone 22, Category 3D
Approvalsshipping classification
DNV GL
Mechanical shock resistance
according to IEC 60068-2-27 g
Vibration
according to IEC/EN 60068-2-6
RoHS
conform
Environmental conditions
Climatic environmental conditionsAir pressure (operation)
795 - 1080 hPa
TemperatureStorage / Transport [ϑ]
-20 - +60 °C
TemperatureOperating ambient temperature min.
0 °C
TemperatureOperating ambient temperature max.
+50 °C
Relative humidityCondensation
Take appropriate measures to prevent condensation
Relative humidityRelative humidity
10 - 90%, non condensing
Supply voltage UAux
Rated operational voltage [UAux]
24 V DC (-20/+25%) V
Protection against polarity reversal
Yes
Potential isolation
No
Supply voltage UPow
Supply voltage [UPow]
24 DC -20 % + 25 % V
Input voltage ripple
≦ 5 %
Protection against polarity reversal
yes

DESIGN VERIFICATION AS PER IEC/EN 61439

Technical data for design verification
Static heat dissipation, non-current-dependent [Pvs]
9.5 W
Operating ambient temperature min.
0 °C
Operating ambient temperature max.
+50 °C
IEC/EN 61439 design verification
10.2 Strength of materials and parts10.2.2 Corrosion resistance
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.1 Verification of thermal stability of enclosures
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.2 Verification of resistance of insulating materials to normal heat
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.3.3 Verification of resistance of insulating materials to abnormal heat and fire due to internal electric effects
Meets the product standard's requirements.
10.2 Strength of materials and parts10.2.4 Resistance to ultra-violet (UV) radiation
Please enquire
10.2 Strength of materials and parts10.2.5 Lifting
Does not apply to enclosures without lifting aids.
10.2 Strength of materials and parts10.2.6 Mechanical impact
Does not apply, since the entire switchgear needs to be evaluated.
10.2 Strength of materials and parts10.2.7 Inscriptions
Meets the product standard's requirements.
10.3 Degree of protection of ASSEMBLIES
Meets the product standard's requirements.
10.4 Clearances and creepage distances
Meets the product standard's requirements.
10.5 Protection against electric shock
Does not apply, since the entire switchgear needs to be evaluated.
10.6 Incorporation of switching devices and components
Does not apply, since the entire switchgear needs to be evaluated.
10.7 Internal electrical circuits and connections
Is the panel builder's responsibility.
10.8 Connections for external conductors
Is the panel builder's responsibility.
10.9 Insulation properties10.9.2 Power-frequency electric strength
Is the panel builder's responsibility.
10.9 Insulation properties10.9.3 Impulse withstand voltage
Is the panel builder's responsibility.
10.9 Insulation properties10.9.4 Testing of enclosures made of insulating material
Is the panel builder's responsibility.
10.10 Temperature rise
The panel builder is responsible for the temperature rise calculation. Eaton will provide heat dissipation data for the devices.
10.11 Short-circuit rating
Is the panel builder's responsibility. The specifications for the switchgear must be observed.
10.12 Electromagnetic compatibility
Is the panel builder's responsibility.
10.13 Mechanical function
The device meets the requirements, provided the information in the instruction leaflet (IL) is observed.

TECHNICAL DATA ETIM 8.0

Programmable logic controllers PLC (EG000024) / Graphic panel (EC001412)
Electric engineering, automation, process control engineering / Display and control component / Panel (HMI) / Graphic panel (HMI) (ecl@ss10.0.1-27-33-02-01 [AFX016003])
Supply voltage AC 50 Hz
0 - 0 V
Supply voltage AC 60 Hz
0 - 0 V
Supply voltage DC
20.4 - 28.8 V
Voltage type of supply voltage
DC
Number of HW-interfaces industrial Ethernet
1
Number of interfaces PROFINET
0
Number of HW-interfaces RS-232
0
Number of HW-interfaces RS-422
0
Number of HW-interfaces RS-485
0
Number of HW-interfaces serial TTY
0
Number of HW-interfaces USB
1
Number of HW-interfaces parallel
0
Number of HW-interfaces Wireless
0
Number of HW-interfaces other
0
With SW interfaces
Yes
Supporting protocol for TCP/IP
No
Supporting protocol for PROFIBUS
No
Supporting protocol for CAN
No
Supporting protocol for INTERBUS
No
Supporting protocol for ASI
No
Supporting protocol for KNX
No
Supporting protocol for Modbus
No
Supporting protocol for Data-Highway
No
Supporting protocol for DeviceNet
No
Supporting protocol for SUCONET
No
Supporting protocol for LON
No
Supporting protocol for PROFINET IO
No
Supporting protocol for PROFINET CBA
No
Supporting protocol for SERCOS
No
Supporting protocol for Foundation Fieldbus
No
Supporting protocol for EtherNet/IP
No
Supporting protocol for AS-Interface Safety at Work
No
Supporting protocol for DeviceNet Safety
No
Supporting protocol for INTERBUS-Safety
No
Supporting protocol for PROFIsafe
No
Supporting protocol for SafetyBUS p
No
Supporting protocol for other bus systems
No
Radio standard Bluetooth
No
Radio standard Wi-Fi 802.11
No
Radio standard GPRS
No
Radio standard GSM
No
Radio standard UMTS
No
IO link master
No
Type of display
TFT
With colour display
Yes
Number of colours of the display
64000
Number of grey-scales/blue-scales of display
0
Screen diagonal
5.7 inch
Number of pixels, horizontal
320
Number of pixels, vertical
240
Useful project memory/user memory
64000 kByte
With numeric keyboard
Yes
With alpha numeric keyboard
Yes
Number of function buttons, programmable
0
Number of buttons with LED
0
Number of system buttons
1
Touch technology
Resistive touch
With message indication
Yes
With message system (incl. buffer and confirmation)
Yes
Process value representation (output) possible
No
Process default value (input) possible
No
With recipes
Yes
Number of password levels
200
With printer output
Yes
Number of online languages
100
Additional software components, loadable
No
Degree of protection (IP), front side
IP65
Degree of protection (NEMA), front side
4X
Operating temperature
0 - 50 °C
Rail mounting possible
No
Wall mounting/direct mounting
No
Suitable for safety functions
No
Width of the front
170 mm
Height of the front
130 mm
Built-in depth
34 mm

APPROVALS

Product Standards
UL 60950-01; CSA-C22.2 No. 60950-1; IEC/EN 61131-2; CE marking
UL File No.
E208621
UL Category Control No.
NWGQ2
CSA File No.
UL 60950-01; CSA-C22.2 No. 60950-1; IEC/EN 61131-2; CE marking
CSA Class No.
NWGQ8
North America Certification
UL recognized, certified by UL for use in Canada
Conditions of Acceptability
The investigated Pollution Degree is: 2

The following end-product enclosures are required: Fire

The unit must be supplied via a SELV source.

The provided Ethernet Connection is only allowed to connect to inhouse networks.
Specially designed for North America
No
Degree of Protection
IEC: IP65, UL/CSA Type: -

DIMENSIONS

2726DRW-54
a, b, c ≧ 30 mm, ϑ 0 ≦ T ≦ 50 °C
EATON
199734

Politica de retur

 Puteți returna majoritatea articolelor noi, nedeschise în termen de 14 de zile de la livrare, pentru o rambursare completă. Vom plăti, de asemenea, costurile de transport pentru retur dacă returnarea este rezultatul unei erori noastre (ați primit un articol incorect sau defect etc.).

 Ar trebui să vă așteptați să primiți rambursarea în termen de doua săptămâni de la livrarea pachetului expeditorului returnat, cu toate acestea, în multe cazuri, veți primi o rambursare mai rapid. Această perioadă de timp include timpul de tranzit pentru a primi returnarea dvs. de la expeditor (5 până la 10 zile lucrătoare), timpul necesar pentru procesarea returnării dvs. după ce îl primim (3 până la 5 zile lucrătoare) și timpul necesar banca dvs. pentru a procesa cererea noastră de rambursare (5 până la 10 zile lucrătoare).

 Dacă trebuie să returnați un articol, pur și simplu conectați-vă la contul dvs., vizualizați comanda utilizând link-ul „Finalizare comenzi” din meniul Contul meu și faceți clic pe butonul Returnați articolele. Vă vom anunța prin e-mail cu privire la rambursarea dvs. după ce am primit și procesat articolul returnat.

 

Transport

 

Putem livra practic prin curier la orice adresa din Romania. Rețineți că există restricții pentru unele produse, iar unele produse nu pot fi expediate către destinații internaționale.

 Când plasați o comandă, vom estima datele de expediere și livrare pentru dvs. în funcție de disponibilitatea articolelor dvs. și de opțiunile de livrare pe care le alegeți. În funcție de furnizorul de transport pe care îl alegeți, este posibil ca estimările datei de expediere să apară pe pagina de oferte de livrare.

chat Comentarii (0)